毕业设计论文--气动机械手PLC控制系统设计.docVIP

学校名称 毕 业 设 计 论 文 气动机械手PLC控制系统设计 指导老师姓名： 专 业 名 称： 班 级 学 号： 论文提交日期： 论文答辩日期： 2008年12月2【摘要】: 在工业生产和其他领域内，由于工作的需要，人们经常受到高温、腐蚀及有毒气体等因素的危害，增加了工人的劳动强度，甚至于危及生命。自从机械手问世以来，相应的各种难题迎刃而解。机械手可在空间抓、放、搬运物体，动作灵活多样，适用于可变换生产品种的中、小批量自动化生产，广泛应用于柔性自动线本设计所用机械部件有电气方面有可编程控制器（PLC）、开关电源、电磁阀、等部件。发出两路脉冲到，Abstract】：In industrial production and other domains, because works need, the people frequently receive factor and so on high temperature, corrosion and virulent gas harms, increased workers labor intensity, even endangers life. Since manipulator being published, the corresponding each kind of difficult problem has been easily solved.Manipulator in space can be arrested, put, moving objects, flexible and diverse movements, can be applied to transform the production of variety of medium and small-volume automated production, is widely used in automatic soft line. PLC Design Manipulator mainly rely on the limit switch and solenoid valve control and promote them. The robot moves are all used to control power, air pressure drive. Its up / down, left / right shift and rotate left / right rotation using a double-double coil solenoid valve to promote completion of the cylinder pressure. The robot moves depend on the conversion limit switches to control the order and in accordance with a certain action. In the robots movement in the process of detection lights will be installed to detect movement of its start and stop. The design of the mechanical components are used in simulation of mechanical hand, there are electric programmable logic controller (PLC), switching power supply, solenoid valves, parts, and so on. Button to issue two drive impulse to the robot, its control before and after moving from Y4 pneumatic valve control, moving from about Y5 pneumatic valve control, spin around by the pneumatic valve control Y6, clamping and relax by the Y7 pneumatic valve control, There are also two buttons start and stop.Manipulators automatically complete a full course of ac