基于LOGO!实现路灯控制系统的设计毕业设计(论文)湖南工业大学.docVIP

专科毕业设计（论文） 基于LOGO！路灯控制系统的设计 学 院（部）： 电气与信息工程学院 专 业： 学 生 姓 名： 班 级： 学号 指导教师姓名： 职称 最终评定成绩 摘 要本论文介绍一种以西门子LOGO!为控制器，并使用与LOGO!配套的LOGO!soft comfort V6.0进行软件设计的自动路灯控制系统。路灯可实现定时自动开启，根据天气变化自动控制功能，手动开关功能以及安全急停功能。本设计借助了LOGO!soft comfort V6.0软件进行控制程序的编写及其仿真，其中在程序中大量采用与门模块、或门模块等相应逻辑功能模块来实现上述控制功能。 本设计是基于LOGO!为控制核心的照明自动控制系统的设计，不但控制结构新颖、紧凑、操作方便，而且提高了控制系统的稳定性，延长了其维护周期和使用寿命，提高了产品可靠性，大大节约电能以及人力资源，符合当前的控制系统发展的主流，被广泛应用于照明控制的各个领域。 关键词：控制系统，路灯，LOGO!ABSTRACT With the continuous expansion of the urban scale, the ways and means of the existing street lights has been far from being able to meet the needs of the development and management of urban street, must rely on modern high-tech management tools. Street management of an information technology as the core, automated management tools to replace the ordinary street light monitoring system. Lighting monitoring, decision-making and management of the entire city built on the IT platform. This paper introduces a kind of Siemens LOGO! For controller, and use and LOGO! Supporting LOGO! Soft comfort v6.6 of automatic software design lamps control system. Street lamp can achieve timing automatic open, according to the weather changes the automatic control function, manual switch function and safety abrupt stop function. This design with the LOGO! Soft v6.6 comfort of control program software written and simulation, which are used in great quantities in the program with door module, or door module corresponding logic function module to implement the control function. This design is based on the LOGO! As the core to control the lighting of the automatic control system design, not only control novel structure, compact, easy to operate, and improve the stability of the control system, extend its maintenance cycle and s