函数信号发生器源程序汇总.doc

#includereg52.h #includeabsacc.h #define DAC0832 XBYTE[0x0fff] int pinlv=256; //改变频率的时延自变量 sbit p20=P2^0; sbit p21=P2^1; sbit p22=P2^2; sbit p23=P2^3; sbit RS=P3^0; sbit RW=P3^1; //液晶显示的端口 sbit E=P3^4; int j=0; unsigned char code TAB[]=0123456789msTIME:; unsigned char code TAB1[]=zhengxianbofangbo sanjiaobo jvchibo ; unsigned char table[4]; float code table2[]={ //正弦波信号采点值 0x80,0x83,0x85,0x88,0x8A,0x8D,0x8F,0x92,0x94,0x97,0x99,0x9B,0x9E,0xA0,0xA3,0xA5, 0xA7,0xAA,0xAC,0xAE,0xB1,0xB3,0xB5,0xB7,0xB9,0xBB,0xBD,0xBF,0xC1,0xC3,0xC5,0xC7, 0xC9,0xCB,0xCC,0xCE,0xD0,0xD1,0xD3,0xD4,0xD6,0xD7,0xD8,0xDA,0xDB,0xDC,0xDD,0xDE, 0xDF,0xE0,0xE1,0xE2,0xE3,0xE3,0xE4,0xE4,0xE5,0xE5,0xE6,0xE6,0xE7,0xE7,0xE7,0xE7, 0xE7,0xE7,0xE7,0xE7,0xE6,0xE6,0xE5,0xE5,0xE4,0xE4,0xE3,0xE3,0xE2,0xE1,0xE0,0xDF, 0xDE,0xDD,0xDC,0xDB,0xDA,0xD8,0xD7,0xD6,0xD4,0xD3,0xD1,0xD0,0xCE,0xCC,0xCB,0xC9, 0xC7,0xC5,0xC3,0xC1,0xBF,0xBD,0xBB,0xB9,0xB7,0xB5,0xB3,0xB1,0xAE,0xAC,0xAA,0xA7, 0xA5,0xA3,0xA0,0x9E,0x9B,0x99,0x97,0x94,0x92,0x8F,0x8D,0x8A,0x88,0x85,0x83,0x80, 0x7D,0x7B,0x78,0x76,0x73,0x71,0x6E,0x6C,0x69,0x67,0x65,0x62,0x60,0x5D,0x5B,0x59, 0x56,0x54,0x52,0x4F,0x4D,0x4B,0x48,0x47,0x45,0x43,0x41,0x3F,0x3D,0x3B,0x39,0x37, 0x35,0x34,0x32,0x30,0x2F,0x2D,0x2C,0x2A,0x29,0x28,0x26,0x25,0x24,0x23,0x22,0x21, 0x20,0x1F,0x1E,0x1D,0x1D,0x1C,0x1C,0x1B,0x1B,0x1A,0x1A,0x1A,0x19,0x19,0x19,0x19, 0x19,0x19,0x19,0x19,0x1A,0x1A,0x1A,0x1B,0x1B,0x1C,0x1C,0x1D,0x1D,0x1E,0x1F,0x20, 0x21,0x22,0x23,0x24,0x25,0x26,0x28,0x29,0x2A,0x2C,0x2D,0x2F,0x30,0x32,0x34,0x35, 0x37,0x39,0x3B,0x3D,0x3F,0x41,0x43,0x45,0x47,0x49,0x4B,0x4D,0x4F,0x52,0x54,0x56, 0x59,0x5B,0x5D,0x60,0x62,0x65,0x67,0x69,0x6C,0x6E,0x71,0x73,0x76,0x78,0x7B,0x7D}; void delay(unsigned char ms); //延时函数 void write_com(unsigned char com); //液晶写指令 void write_data(unsigned char dat); //液晶写数据 void