外文翻译---变压器精选.docVIP

PAGE 中英文对照翻译 原文：TRANSFORMER Transformers come in many sizes. Some power transformers are as big as a house. Electronic transformers, on the other hand, can be as small as a cube of sugar. All transformers have at least one coil. Most have two although they may have many more. The usual purpose of transformers is to change the level of voltage. But sometimes they are used to isolate a load from the power source. TYPES OF TRANSFORMERS Standard power transformers have two coils. These coils are labeled PRIMARY and SECONDARY. The primary coil is the one connected to the source. The secondary is the one connected to the load. There is to no electrical connection between the primary and secondary. The secondary gets its voltage by induction. The only place where you will see a STEP-UP transformer is at the generating station. Typically, electricity is generated at 13,800 volts. It is stepped down to distribution levels, around 15,000 volts. Large substation transformers have cooling fins to keep them from overheating. Other transformers are located near points where the electric power is used. TRANSFORMER CONSTRUCTION The coils of a transformer are electrically insulated from each other. There is a magnetic link, however. The two coils are wound on the same core. Current in the primary magnetizes the core. This produces a magnetic field in the core. The core field then affects current in both primary and secondary. There are two main designs for cores: The CORE type has the core inside the windings. The SHELL type has the core outside. Smaller power transformers are usually of the core type. The very large transformers are of the shell type. There is no difference in their operation, however. Coils are wound with copper wire. The resistance is kept as low as possible keep losses low. IDEALIZED TRANSFORMERS Transformers are very efficient. The losses are often less than 3 percent. This allows us to assume that they are perfect in many computations. Perfect means that