劈木机的整机图片-QualityCraftIndustries.DOCVIP

5 TON LOG SPLITTER FOR YOUR SAFETY READ AND UNDERSTAND THE ENTIRE MANUAL BEFORE OPERATING MACHINE MODLE NUMBER : LS5T-52 SERIAL NUMBER : Both model number and serial number may be found on the main label. You should record both of them in a safe place for future use. Save This Manual for Future Reference Imported by/Importé par/Importado cercaQuality Craft Ltd. Surrey, BC, Canada V3S 5N4 Made In China/Fabriqué En Chine/Hecho En China TABLE OF CONTENTS CONTENTS PAGE Safety Warnings Cautions 2-4 Application Conditions 4 Specifications 5 Electrical Requirements 5 Contents of Shipping Container 5 Set up and Preparation for Operation 6, 7 Wiring Diagram 7 Plumbing Diagram 7 Log Splitter Operation 8, 9 Freeing a Jammed Log 9 Replacing Hydraulic Oil 10 Sharpening Wedge 10 Trouble Shooting 11 Parts Schematic (1) 12 Parts Schematic (2) 13 SAFETY WARNINGS CAUTIONS SYMBOL AFFIXED TO THE MACHINE SAFETY WARNINGS INSTRUCTIONS UNDERSTAND YOUR LOG SPLITTER Read and understand the owner’s manual and labels affixed to the log splitter. Learn its application and limitations as well as the specific potential hazards peculiar to it. INSPECT YOUR LOG SPLITTER Check your log splitter before turning it on. Keep guards in place and in working order. Form a habit of checking to see that keys and adjusting wrenches are removed from tool area before turning it on. Replace damaged, missing or failed parts before using it. AVOID DANGEROUS CONDITIONS Put the log splitter on a 60 - 75cm high, stable, flat, and level work bench where there is plenty of room for handling, and help the operator stay alert. Bolt the log splitter to the work surface if it tends to slip, walk, or slide. Keep your work area clean and well lighted. Cluttered areas invites injuries. Do not use the log splitter in wet or damp areas or expose it to rain. Do not use it in areas where fumes from paint, solvents or flammable liq