橡胶阻燃带配混监控系统研究与实现.docVIP

辽宁工程技术大学硕士学位论文 PAGE I 摘 要 本文以辽宁工程技术大学电子与信息工程学院和阜橡有限责任公司合作项目-阜新橡胶有限责任公司阻燃输送带自动配混系统为研究背景，以新的视点分析了国内外橡胶阻燃带生产工业中存在的制约因素，紧紧围绕阻燃输送带自动配混实现的主要问题（控制方案、称量精度与速度、硬件与软件实现）展开研究。 在此基础上，本文对阻燃输送带的整个工序提出计算机监控实现技术，设计了IPC-PLC DCS系统，运用智能连续分段参数在线辩识修正动态计量算法，实现系统自动动态称量，提高了阻燃输送带连续生产中动态称量的速度与精度。并从硬件与软件两个方面考虑将整个工艺规划于密闭管路和各种料仓中，实现作业无尘化、生产自动化和管理科学化，为阻燃输送带工业的发展做出新的探索和创新。 关键词：橡胶阻燃带；计算机监控；IPC-PLC DCS；动态称量 Abstract This thesis from a different angle analyzes the restrict factors within process of the abroad and native rubber anti-burn belt improvement. Focusing on main problems in the realization of automatic batching for rubber anti-burn belt the deep research is carried out on the reality of corporative item of Liaoning technical university and Fuxin rubber Ltd.. Based on such background thesis brings forward microcomputer monitoring technique to the whole craft of rubber anti-burn belt, designs the IPC-PLC DCS system and applies dynamic measurement algorithm of intelligent parameter identification to realize weight automatically. The system improves dynamic measurement precision and speed in rubber anti-burn belt continual production. At the same time, the thesis accomplishes the whole craft in airtight pipelines and storehouse, realizes dustless production, clean producing condition, automation, scientific management from the angle of hardware and software, makes some new exploration and creation in production of rubber anti-burn belt industry. Key words: Rubber anti-burn belt, Microcomuter monitoring, IPC-PLC distributed control system, Dynamiac measurement 目 录 TOC \o 1-4 \h \z \u HYPERLINK \l _Toc199681937 1 绪论 PAGEREF _Toc199681937 \h 1 HYPERLINK \l _Toc199681938 1.1 课题背景 PAGEREF _Toc199681938 \h 1 HYPERLINK \l _Toc199681939 1.2 课题的来源与意义 PAGEREF _Toc199681939 \h 2 HYPERLINK \l _Toc199681940 1.3 国内外研究现状 PAGEREF _Toc199681940 \h 3 HYPERLINK \l _Toc199681941 1.4 论文的主要内容与章节安排 PAGEREF _Toc199681941 \h 5