外文翻译-节能小车的转向和制动系统精选.docxVIP

密 级分类号编 号成 绩本科生毕业设计 (论文)外 文 翻 译原 文 标 题节能小车转向和制动系统设计译 文 标 题Steering and braking system design of saving car作者所在系别机电工程学院作者所在专业车辆工程作者所在班级作 者 姓 名作 者 学 号指导教师姓名指导教师职称副教授完 成 时 间2017年3月译文标题节能小车的转向和制动系统设计原文标题STEERING AND BRANING SYSTEM作 者译 名国 籍原文出处The modern automatic transmission is by far , the most complicated mechanical component in today’s automobile . It is a type of transmission that sifts itself . A fluid coupling or torque converter is used instead of a manually operated clutch to connect the transmission to the engine .There are two basic types of automatic transmission based on whether the vehicle is rear wheel drive or front wheel drive . On a rear wheel drive car , the transmission is usually mounted to the back of the engine and is located under the hump in the center of the floorboard alongside the gas pedal position . A drive shaft connects the transmission to the final drive which is located in the rear axle and is used to send power to the rear wheels . Power flow on this system is simple and straight forward going from the engine , through the torque converter , then trough the transmission and drive shaft until it reaches the final drive where it is split and sent to the two rear transmission .On a front wheel drive car , the transmission is usually combined with the final drive to form what is called a transaxle . The engine on a front wheel drive car is usually mounted sideways in the car with the transaxle tucked under it on the side of the engine facing the rear of the car . Front axles are connected directly to the transaxle and provide power to front wheels . In this example , power floes from the engine , through the torque converter to a larger chain that sends the power through a 180 degree turn to the transmission that is along side the engine . From there , the power is routed through the transmission to the final drive where it is split and sent to the two front wheels through the drive axles .There are a number of other arrangements includ