[基础医学]高精度食管功能分析系统.pptVIP

1 2 3 4 5 6 P r e s s u r e Impedance Contour Plot View of Swallow with Normal Manometry Complete Bolus Transit LES 放松 食管食团传输 咽喉收缩 食管收缩波形 LES关闭 UES松弛 阻抗 压力 正常吞咽 食管运动不协调 吞咽后反流 贲门失迟缓 食管远端痉挛 案例 基于Windows设计的软件，功能强大、内容丰富、使用方便。 可以任意选择通道显示 准确记录食团传输 开始 结束 可显示、可编辑 吞咽过程 实时显示各通道数据，包括峰值、峰次、吞咽时间、残余压、食团传输速度 数据精确到毫秒 Click and Drag 创造个性化测量模式 不同模式自由转换 自动测量和分析 全部测量数据自动以数据库形式储存，直接进行统计。 5大模块，报告内容丰富，数据翔实 LES、UES、食管体下部和上部 6种吞咽类型 可以显示全部32个压力通道和4/16个阻抗通道。 图文并茂的报告 MicroSoft Word格式报告，便于编辑。 * * * * * * The impedance data is displayed above the pressure data during acquisition * Activate enough channels to see where the first channel rises from the baseline. To do this, click on ‘View’ and select ‘Show/Disable Channels’. * Note the grouping of channels from 30 to 36. These are the channels located at the LES. Activate channels above or below this original grouping to easily identify the distal and proximal LES. Example: you may need to turn on channels 28 and 29 to better see the proximal LES and channels 37 to see the distal LES. * If there is bolus entry in channel Z1 and exit in Z2,3, and 4 and the rules of time have been met as previously discussed, then Complete BT or Bolus Transit will say Yes. These measurements do not need to be edited. * When editing the esophageal body, remember these few principles: The Start of contraction should be at the upstroke of the contraction, The Peak is the highest point of the contraction, and The End of contraction is where a line drawn through the down slope of the contraction intersects the baseline Move any analysis marks needed by clicking and dragging the mark to the desired location. The vertical lines are used to mark the onset and end of contraction and the X is used to indicate the highest peak of the contraction. Observe the data in the analysis box. * Name the event ‘Distal’. The ‘Create Event’ tool will calculate the channel and depth. Click OK * The upper esophageal body study measures the striated muscle within the