119 RD作业指导书和工时介绍.pptVIP

作业指导书和工时介绍INTRODUCTION OF WORKING INSTRUCTION AND WORKING TIME 作业指导书的拟制Formulation of working instruction 1.工艺信息收集 technical information collection. 2.样品工艺路线的分析和考虑 analysis of technical path of sample. 3.过程特殊性分析 analysis of speciality of process. 4.新设备的采购和新工装夹具的设计和制作 purchase of new equipment and design and making of new jigs. 5.新产品试装 trial assembly of new product. 6.作业指导书拟制 formulation of new working instruction. 7.作业指导书的审核、批准和下发 Check, approval and distribution of working instruction. 8.作业指导书培训 Working instruction training. 9.作业指导书批量生产的验证 Verification of working instruction in mass production. 10.作业指导书的修订、下发 Recension and distribution of working instruction. 11.作业指导书注意事项 Notices of working instruction. 工艺信息收集technology information collection 样品的构成与结构 components and structure of sample 特殊配件的要求和其它一些特殊要求 requirement of special part and other special requirements. 特殊特性清单 list specialities. 材料的定额清单 material ration list. 样品工艺路线的分析和考虑analysis of technology flow of sample 新设计配件图纸审核 check drawing of newly designed parts. 新设备的调研和使用，确保产品投产时新设备的按时到位和使用。 investigation and use of new equipment, insure that the new equipment arrives on time when product is put into production. 新工艺的可行性分析（新的工艺是否适合大批量生产） posibility analysis of new technology (whether new technology applies to mass production.) 过程特殊特性分析process speciality analysis 过程特殊特性分析是确保以后批量生产的重要环节 特殊特性项目的建立 特殊工位控制点的明确 新设备的采购和新工装夹具的设计和制作purchase of new equipments, design and making of new jigs 新设备前期调研资料的整理和审核 check and file first stage investigation material of new equipment. 新设备规格书的建立 formulation of specification handbook of new equipment. 新设备合同的拟制 draft contract for new equipment. 新设备采购申请 purchase application of new equipment. 新产品试装 trial assembly of new product 根据配套单核对样品开发人员提供的配件 check parts, supplied by RD staff, according to BOM. 核对样品开发人员提供配料定额的正确性和合理性 check accuracy and reasonability of the ration of each part of a pro