微网运行模式的平滑切换控制策.doc

  1. 1、本文档共9页,可阅读全部内容。
  2. 2、有哪些信誉好的足球投注网站(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
微网运行模式的平滑切换控制策.doc

微网运行模式的平滑切换控制方法研究 郭振华, 刘桂英, 粟时平, 张睆曦 图4 图 5 没有英文对译 (长沙理工大学 电气与信息工程学院, 湖南 长沙 410002) 摘 要:微电网存在两种运行模式,即并网运行模式和孤岛运行模式,两种运行模式的平滑切换是微电网安全稳定运行的重要保障。文中主要从两个方面考虑微电网运行模式的平滑切换,一方面是系统级微电网整体控制策略,采用主从控制和对等控制相结合的综合控制方法,另一方面是局部微电源控制策略,提出一种下垂系数随微网频率和电压动态变化的改进下垂控制,同时为实现微电网孤岛运行模式向并网运行模式的平滑切换设计了预同步控制器。最后通过MATLAB仿真表明,该方法不仅可以实现切换过程中电压和频率的稳定,而且还能减少微电源控制方式的切换次数,在一定程度上减小了控制方式切换失败的可能性,从而提高了微电网运行的可靠性。 关键词:微电网;并网运行;孤岛运行;平滑切换 中图分类号:TM 文献标识码:文章编号:1001-1390(201)-0000-00 Study on control methods of smooth switching under micro-grid operation mode Guo Zhenhua, Liu Guiying, Su Shiping, Zhang Wanxi (College of Electrical and Information Engineering, Changsha University of Science and Technology, Changsha 410002, China) Abstract: There are two operating modes in micro-grid,that is grid-connected mode and islanded operation mode, The smooth switching between two modes is an important measure to ensure the secure and reliable operation of micro-grid. In this paper, considering micro-grid operating modes of smooth switching from two sides, on the one hand, it is a system-level micro-grid overall control strategy, which uses an integrated control method from the combination of using the main control and peer control, on the other hand, it is a local micro-power control strategy, which proposes an improved coefficient droop control ,and the droop coefficient can dynamically change with frequency and voltage, At the same time, the pre-synchronous controller is designed to achieve the smooth switch from micro-grid islanded operation mode to grid-connected operation mode. Finally, MATLAB simulations show that this method can not only realize the voltage and frequency stability during the process of switching, but also to reduce the switching number of the micro–power supply control mode, to some extent, it reduces the possibility of failure of the control mode switching, thus improving the reliability of the micro

您可能关注的文档

文档评论(0)

wendang_12 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档