基于单片机控制的直流电机调速控制器的的设计.docVIP

目录 摘要……………………………………………………………… (02) 前言………………………………………………………………(03) 3.设计方案………………………………………………………… (03) 4.单元电路设计…………………………………………………… (04) 4.1电源电路设计……………………………………………… (04) 4.2复位电路设计……………………………………………… (05) 4.3晶振电路设计…………………………………………… (05) 4.4驱动电路设计……………………………………………… (06) 4.5霍尔元件测速设计………………………………………… (09) 4.6 LED显示电路设计………………………………………… (10) 4.7键盘的设计…………………………………………………(11) 5.软件流程图设计…………………………………………………(11) 6.设计总结…………………………………………………………(14) 7.参考文献…………………………………………………………(15) 8.总体电路图设计………………………………………………(16) 摘要 本文是对直流电机PWM调速器设计的研究，主要实现对电机的控制。本课程设计主要是实现PWM调速器的正转、反转、加速、减速、停止等操作。为实现系统的微机控制，在设计中，采用了MCS-51单片机作为整个控制系统的控制电路的核心部分，配以各种显示、驱动模块，实现对电动机转速参数的显示和测量；由命令输入模块、H模块键盘 关键字：直流电动机 MSC-51单片机 PWM调速 Abstract：This paper is to dc motor PWM governor, mainly design realize to the motor of the control. This course is designed to realize PWM governor are turning, inversion, accelerate, slowing down, stop the operation. To realize the microcomputer control system, in design, the paper describes-51 SCM as the whole control system control circuit of the core part, match with all kinds of display, driver modules, realize the motor speed parameters of the display and measurement; By the command input module, H driver module. The interruption of independent type with keyboard as a command input, microcomputer in the program under control, and constantly drive circuit to send the PWM, H drive circuit complete motor positive negative control. In the design, the speed, by changing the way PWM PWM accounted for empty to change the motor than armature voltage, and achieve the speed of motor. The design of the control system in the hardware structure, use a lot of integrated circuit module, greatly simplified the hardware circuit and improve the stability and reliability of the system, the system of the performance improved. Finally, we give system program flow chart. Keyword: DC motor MSC-51 single-chip microcompute PWM speed regulation 前言 当今，自动化控制系统在各行各业得到了广泛应用和发展。而直流电动机具有良好的起动、制动性