血球仪希森美康XN培训模板PPT.ppt

* XN CHECK BF – 基本特点 用途 : - QC for BF (Body Fluid) module 检测参数: WBC-BF, MN#/%, PMN#/%, TC-BF# (for WDF ch) RBC-BF (for RBC-I ch) * measured on BF mode 物质 : Cell-Chex Auto (Streck) 水平 : 2 levels (Level 1,2) 稳定性: Closed Vial Stability (CVS) – 75 days from the 1st day of the shipment Open Vial Stability (OVS) – 30 days 规格 : - 3.0 ml / vial * XN CAL – 基本特点(1) 检测参数: WBC, WBC-D, WBC-P, RBC, RBC-O, PLT, PLT-O, RET%, HCT, HGB (for Customer) Above parameters + Sensitivity Paramters* * WNR-X,-Y, WDF-X,-Y, WPC-X,-Y, RBC-X,-Y, RBC-X(PLTF), RBC-Y(PLTF) 水平 : - 1 level 稳定性 : Closed Vial Stability (CVS) EU/AP: about 50 days (from Streck shipment) Open Vial Stability (OVS) – 4 hours 规格 : - 3.0 ml / vial 物质: Same as e-CHECK(XE) XN CAL 靶值单 a) For Customers b) For FSRs Count Calibraiton (CBC + Ret%) Count Calibraiton (CBC + Ret%) Sensitivity Adjustment * XN CAL PF – 基本特点(1) 检测参数: PLT-F 水平 : - 1 level 稳定性 : Closed Vial Stability (CVS) EU/AP: about 50 days (from Streck shipment) Open Vial Stability (OVS) – 4 hours 规格 : - 3.0 ml / vial 复检功能——3R（Repeat、Rerun、Reflex） [Repeat] 当某标本首次自动检测，仪器出现错误报警，触发了Repeat规则后，仪器自动对该样本再检测一次相同的项目。 [Rerun] 当某标本首次自动检测，检测结果触发了Rerun规则后，仪器自动对该样本重新检测一次相同的项目。 [Reflex] 当某标本首次自动检测，检测结果触发了Reflex规则后，仪器自动对该样本重新检测一次，但检测的项目与第一次不同。（例如首次检测WNR+WDF，触发了Reflex规则，仪器自动检测） * 规则的优先级（1） [BlockRerunReflex] [Rerun] [Reflex] [QueryToHost] [BlockRepeat] [Repeat] [BlockValidate] [Validate] [BlockReport] [Report] [Repeat] [Rerun] [Reflex] [QueryToHost] 规则的优先级（2） Rule 1 Rure 2 Execution 1 None Rerun Rerun 2 None Reflex Reflex 3 None BlockRerunReflex None 4 Reflex Rerun Rerun 5 Reflex Reflex Reflex (rule 1+2) 6 Reflex BlockRerunReflex None 7 Rerun Rerun Rerun 8 Rerun Reflex Rerun 9 Rerun BlockRerunReflex None 10 BlockRerunReflex Rerun None 11 BlockRerunReflex Reflex None 12 BlockRerunReflex BlockRerunReflex None Block指不执行Rerun或Reflex或Repeat规则 * 流水线 （XN-3000/XN-9000） SP-10 * 基本性能和SP-1000相同 单机模式时，架子容易从进样器上取出 微