汽车底盘新技术的应用中英文中英文翻译.doc

英文资料翻译 Motor car chassis new technology application 1.Automobile braking system technology application Along with the mechanical and electrical technical development, the electronic technology also infiltrated the braking system. Appeared has been called Electron braking system the new technology, already applied on the intermediate and senior passenger vehicle. Is different with the traditional automobile braking system, the electron braking system has substituted the partial mechanical parts by the electronic component, is a integration of machinery system. At the same time, the hydraulic pressure production and the transfer mode are dissimilar. In traditional braking system, pilot through brake master cylinder adjustment, in wheel cylinder establishment brake pressure, but electron braking system then is provides the brake pressure through fluid strength a air-save bottle, but stores the pressure is produces by the electrically operated piston pump, may provide the hydraulic pressure which continuously applies the brake many times. The electron applies the brake control system generally by sensor, ECU (Electronic control unit)With execution(Hydraulic control unit)Constitution. The brake pedal and between the wheel brake power transmission is the separation, in applies the brake in the process, braking force by ECU with execution control. When the automobile is being easy the moist road surface or which slips when goes by in the snow and ice cover road surface, suddenly gets on the brakes on very easily the wheel hugs dies, is easy to produce sideslips the phenomenon, if the front wheel is held dies, is unable to cause the automobile extension to ask, this in the driving process is extremely dangerous, therefore in the automobile brake system which the conventional machinery controls, the pilot uses the spot to move the braking vane frequently, avoids the wheel hugging dies. In order to guarantee the automobile applies the brake the time security, will apply the b