11.2.0.4_RAC_RHEL6_静默安装_加减节点.docx

前言本文档第2-10章详细地描述了在RHEL 6下安装Oracle RAC数据库，整个过程为全静默安装，适合远程及无图形化安装等需求，所有步骤仅供参考。第11-13章详细地介绍了RAC数据库日常的维护，包括节点的增减等。第14章介绍了如何在命令行界面安装图形化并启用。注：本文档遇到需要在特定节点上操作的均在目录后用（rac0x）标注，特此说明。系统环境Hostnamerac01rac02Public IP1/242/24Private IP//24Virtual IP4/245/24SCAN IP0/24SCAN Namerac-scanService NameorclAll PasswordOracle123服务器安装操作系统安装光盘安装操作系统版本：Red Hat Enterprise Linux 6.5 x86_64放入光盘，出现下面安装界面，按Esc键出现boot:提示符，输入linux text进入文本安装Skip跳过光盘检查主机名、网关设置--rac01vi /etc/sysconfig/networkNETWORKING=yesHOSTNAME=rac01GATEWAY=--rac02vi /etc/sysconfig/networkNETWORKING=yesHOSTNAME=rac02GATEWAY=重启服务service network restart临时IP地址设置--rac01ifconfig eth0 1 netmask --rac02ifconfig eth0 2netmask 网卡绑定--rac01cat /etc/sysconfig/network-scripts/ifcfg-bond0 EOFDEVICE=bond0TYPE=EthernetONBOOT=yesNM_CONTROLLED=noBOOTPROTO=staticIPADDR=1NETMASK=GATEWAY=BONDING_OPTS=mode=1 miimon=100 primary=eth0EOFcat /etc/sysconfig/network-scripts/ifcfg-bond1 EOFDEVICE=bond1TYPE=EthernetONBOOT=yesNM_CONTROLLED=noBOOTPROTO=staticIPADDR=NETMASK=BONDING_OPTS=mode=1 miimon=100 primary=eth2EOF--rac02cat /etc/sysconfig/network-scripts/ifcfg-bond0 EOFDEVICE=bond0TYPE=EthernetONBOOT=yesNM_CONTROLLED=noBOOTPROTO=staticIPADDR=2NETMASK=GATEWAY=BONDING_OPTS=mode=1 miimon=100 primary=eth0EOFcat /etc/sysconfig/network-scripts/ifcfg-bond1 EOFDEVICE=bond1TYPE=EthernetONBOOT=yesNM_CONTROLLED=noBOOTPROTO=staticIPADDR=NETMASK=BONDING_OPTS=mode=1 miimon=100 primary=eth2EOF--Allcat /etc/sysconfig/network-scripts/ifcfg-eth0 EOFDEVICE=eth0TYPE=EthernetONBOOT=yesNM_CONTROLLED=noBOOTPROTO=noneMASTER=bond0SLAVE=yesEOFcat /etc/sysconfig/network-scripts/ifcfg-eth1 EOFDEVICE=eth1TYPE=EthernetONBOOT=yesNM_CONTROLLED=noBOOTPROTO=noneMASTER=bond0SLAVE=yesEOFcat /etc/sysconfig/network-scripts/ifcfg-eth2 EOFDEVICE=eth2TYPE=EthernetONBOOT=yesNM_CONTROLLED=noBOOTPROTO=noneMASTER=bond1SLAVE=yesEOFcat /etc/sysconfig/network-scripts/ifcfg-eth3 EOFDEVICE=eth3TYPE=EthernetONBOOT=yesNM_CONTROLLED=noBOOTPROTO=noneMASTER=bond1SLAVE=yesEOFcat /etc/modprobe