67’-69’ Camaro Pro-Touring Rear Frame.pdfVIP

67’-69’ Camaro Pro-Touring Rear Frame 4x2” Canted 4-Link Rear Frame System for 1967-69 Camaro and Firebird B-Pillar Back System Shown Chassisworks’ canted 4-bar Camaro rear frame system is a Features/Benefi ts: truly versatile high-performance suspension solution, suitable • Fits 345/30-20 rear tires for high-power, big-tire, pro-touring projects that require more strength and stiffness than systems mounted to the OEM sheet (13.5” section width) metal can provide. Achieving a very low rocker height of 4” with (28.2” overall diameter) massive rear tires was one of the system goals. We are proud to • Highly adjustable triangulated state that nearly all of the normally ‘one off’ chassis and sheet 4-link rear suspension metal fabrication that is required to tuck extremely large tires, drivetrain, and exhaust into your Camaro is expertly built into a • 4 x 2 x .120”-wall boxed tubing neatly packaged ‘off the shelf’ system. To ensure perfect geometry frame rails stronger than OEM and fi t with minimal effort while saving considerable installation • Supported trunk fl oor for NoFab time, rear frames including front crossmember ship as a factory- battery mount and fuel tank welded subassembly with unattached 2 x 2” trunk outriggers and 3 x 2” front subframe connectors for easier installation. The 4 x • Ships as factory-welded assembly 2 x .120”-wall rear frame is designed with minimal rise over the • Complete line of NoFab rearend housing and maximum clearance