德马格Positioning measuring system_en.pptVIP

The DME 5000 distance measuring sensor is a compact optical distance sensor. The DME is mounted in such a way that the transmitted laser beam hits a reflector. The reflector of the sensor moves along the laser beam. The recipient of the DME receives the light reflected by the reflector and calculates the distance between the sensor and reflector by measuring the time between sending the light and receiving it back. The measured distance is transmitted to a control unit or a position control loop via an Profibus interface. Slide * DCC Cranes Components dep. 1205 - Prein Positioning measuring system long travel master positioning measuring system by distance laser long travel slave positioning measuring system by laser Hoist crane positioning measuring system by absolute encoder cross travel positioning measuring system by distance laser overview Distance laser DME 5000 ( x- and y measuring device ) DME 5000 - Assembly The DME 5000 and the reflector are mounted in such a way that the reflector is always in the detection field of the sensor. The DME 5000 is aligned in such a way that there is a clearly visible light spot in themiddle of the reflector (even at greater distances). The mounting bracket available as an accessory enables simple alignment in the X and Y directions: DME 5000 - Assembly The reflector size should be selected so that the light spot does not move from the reflector due to vibrations. If the reflector is attached to the moved part, smaller reflective tape normally suffices. To avoid highly reflective surfaces (e. g. shelves or other surfaces) to mirror in light beams or scattered light, align the reflector in the ?free space“ : mount with approx. 3° slant (X or Y direction). 3 o DME 5000 - Arrangement of Measuring Sensors The distance of neighboring distance m