纯净水设备英文版说明书(FINAL).docVIP

Pure Water Equipment Series User Manual HuiYuan Pure Water Equipment Factory 1. Company Brief HuaiBei HuiYuan Pure Water Device Factory is a high-tech company incorporated with design, development, manufacture and management. We are specialized in pure water equipment, mineral water equipment, and undertaking water treatment project with a strong technical force, perfect supporting facilities, timely after-sales services and regulated management system. With the pure water equipment series passed the examination charged by national quality supervision institute, we made the recording effective enterprise standard and successfully passed ISO19001 quality management system certification. 2. Preliminary Introduction before Operation 2.1 With the equipment placed into the workshop building, make a stable installation. Connect water inlet of booster pump to source water. Attach pure water outlet and wastewater outlet to water outlet pipeline. Connect main line of distributor box to the power supply. For safety, joint the antapical horn screws of high-pressure pump and booster pump to the ground wire. 2.2 With the equipment power on, check whether high-pressure pump, booster pump, ozone generator or ultraviolet sterilizer, and water break protector are in normal operating condition. 2.3 Start up booster pump to clean multiple media filter repeatedly until its inner water flow turns clear. Then clean active carbon filter until its inner water flow turns clear. Close the control valve of active carbon filter, and clean the ion-exchanger until its inner water flow turns clear. And working of pretreatment system cleaning is completed. 2.4 Start up booster pump to make the water flow pass through the pretreatment system into precision filter. Open the air vent valve of precision filter, and close it until the air is discharged completely. Start up high-pressure pump to make the water flow into reverse osmosis system, open the pressure regulating valve fully and clean RO memb