Piolt Pioneer窗口参数含义及中英文对照.docVIP

Piolt Pioneer窗口参数含义 及中英文对照 1、TD Radio窗口 参数名称 参数描述 PCCPCH RSCP(dBm) 主公共控制物理信道的平均接收信号码功率（Primary Common Control Physical Channel Received Signal Code Power. from -115 to -25） DPCH RSCP(dBm) 专用物理信道的平均接收信号码功率(Dedicated Physical Channel Received Signal Code Power. The value range is from -120 to -57) Path Loss(dB) 主公共导频信道的路径损耗 (The path loss of Primary Common Pilot Channel) UTRA Carrier RSSI(dBm) 载波（RSSI-接收信号强度）(The UTRA Carrier RSSI which the value range is from -94dBm to -32dBm) Time Advance(Chip/8) 时间提前量 (Timing Advance used to compute the distance between NodeB and MS) UpPCH TxPower(dBm) UE在一个载波上上行导频信道的平均发射功率(Uplink Pilot Channel Transmit Power) BLER (%) 传输信道的块错误率—误块率(Block Error Ratio) UE_TxPower(dBm) UE在一个载波一个时隙上的平均发射功率(User Equipment Transmit Power) PCCPCH SIR(dB) 主公共导频信道的SIR(The SIR of Primary Common Control Physical Channel) C/I(dB) 载干比(Carrier-to-interference ratio) UARFCN 主服务小区的主频点(UTRA Absolute Radio Frequency Channel Number) TrCH Count DRX循环长度系数，用于计算指定UE的寻呼次数(The total counts of Transmit Channel) CS Service 传输信道的总个数(The coding ratio of Circuit Switch Service. The unit is kbps) PS Service 电路交换业务的编码速率(The transmit ratio of Packet Service. The unit is kbps) DRX Coefficient 分组交换的传输速率(Discontinuous Reception Coefficient used to compute the paging numbers of UE) SS 帧同步偏移(Synchronization Shift) 2、TD Serving/Neighbor窗口 参数名称 参数描述 UARFCN 主服务小区的主频点 CPI 小区识别符(Cell Parameter Identifier) RSCP(dBm) 接收到的信号功率强度(Received Signal Code Power) Carrier RSSI(dBm) 载波RSSI(The UTRA Carrier RSSI which the value range is from -94dBm to -32dB) Path Loss(dB) 路径损耗 Rs/Rn 小区重选判决准则参数(The standard parameters to judge cell reselction) Cell Name 小区名称 Distance(m) UE与服务小区的距离(The distance between UE and serving cell) 3、TD System Parameters窗口 参数名称 参数描述 MCC 国家识别码(Mobile Country Code (0---999)) MNC 网络识别码(Mobile Network Code (0---99)) LAC 位置区域码(Location Area Code) RAC 路由区域码(Routing Area Code) Cell ID 小区ID(Cell Identifier) PCCPCH TxPower(dBm) PCCPCH信道的发射功率(The TxPower of Primary Common Control Physic