Safe Work Method StatementJobsite Analysis for Profiling ：安全工作方法说明现场分析图.docxVIP

Activity Description: Sampling of Hot Bituminous MaterialSWMS No: Rev:The purpose of this Safe Work Method Statement is to eliminate (or reduce as far as practicable) the possibility of an accident occurring where persons may suffer injury or work related illness, or where property may be damaged. A consultative process has been used to complete this SWMS.Written prepared by: Heather HookPosition: WHS Adviser, WHS Inspector, Fire Safety Advisor, Site Safety Health Rep.Contact Details: 0438134886Reviewed By: Approved By: Position: Position: ALL ASSOCIATED PERSONNEL ARE TO READ, UNDERSTAND, SIGN FOLLOW THIS WORK METHOD WHEN CARRYING OUT THE NOMINATED TASKRole of those who will conduct task:Position E.g.: Sampler/Laboratory Assistant /Transport workerQualifications and/ or competencies required:A general construction induction card (previously Blue and White card) must be carried at all timesThe person conducting the task will need to have successfully completed the unitRIICBS203A Safely handle bituminous materials from either of the below:Evidence of attainment or another nationally recognised qualificationTraining completed at a industry training schoolPersonnel involved: E.g.: Sampler/Delivery Driver/Spray SealerEquipment Materials used:Sampling TinsTongsSampling Equipment,Personal Protective equipment (PPE) to be used:Gauntlet (long) glovesSafety bootsHi-Visibility clothingFace protection (full face shield)Long pantsLong sleeved shirtFire retardant balaclava.*Full Face, head and neck protection is mandatory*Ensure PPE is fit for purpose before useDetails of emergency procedures:For major emergencies contact 000 Safety Data Sheet’s (SDS) must be available on site at all timesBitumen Burns cards must be available on site at all timesLocation of burns cooling facilities to be identified. (Static sites will have a shower or sink facilities; Mobile sites may have large water container stations) All other incidents /injuries to be re