巴拉圭登记要求.docxVIP

Documents needed for registration of pesticide inParaguay巴拉圭登记要求原药的登记要求序号英文原文中文翻译1Letter of Authorization.（No need to be legalized ）授权信（无需使馆认证）2Registration certificate （Legalized by Embassy of Paraguay）登记证（ICAMA）(使馆认证)3Identity 基本信息Applicant Manufacturer Common name: accepted by ISO, or proposed, in its order, by BSI, ANSI, WSSA or the manufacturer, until its acceptance or denomination by ISO. Synonymous Chemical name accepted or proposed by IUPAC Number CAS Empirical formula Structural formula Number of experimental code Chemical(s) group(s) Schematic diagram of the manufacture process Minimum content of active ingredient Isomers Maximum limit of each present impurity whose content is equal or superior to 1g/kg (based on the data of analysis of five lots like minimum). The impurities must be identified and be quantified. The identified fraction of the active substance chemical technical degree does not have to surpass the 20 g/kg. Maximum limit of each excellent impurity whose content is inferior to 1 g/kg Additives (ej.: estabilizantes) 申请人制造商通用名同义的名称IUPAC命名CAS 号经验式化学式实验代码化学组生产工艺的原理图活性成分的最低含量异构体含量大于等于1 g/kg的杂质的最大含量含量小于1 g/kg的杂质的最大含量添加剂4GPS Position Of The Mufacture工厂的地理坐标5Five batch report5批次报告6Certificate of analysis.分析单7Composition certificate signed by the responsible of the manufacturer company组成8Manufacturing process生产工艺Name and address of the manufacturer.General characterization of the process. Diagram of manufacture with the different chemical reactions that are happening during the process.Identification of the used materials for the production of the product.Description of the used equipment.General description of the conditions (for example: temperature, pressure, pH, humidity) that are controlled during the process.Description of possible reaction after the formulation process between active ingredients o between this and others components of the formulation or the package. Possible migrations of materials of the package and the product.生产商的名称和地址工艺