31.eu-表示好,优秀.doc

The engineerings frame fills a wall adoption clay hollow brick.The wall body should sign skin few poles while carving to build, the ash sews should the horizontal even Shu keep, The sand straches full.Fill a wall to carve into beam plank the bottom should stay a 100 mm or so, at put on to use clay brick before the ash inclined carve a crest tight.Carve a piece When wall carved to build, should carve four in the bottom mat skin clay brick, the doors and windows entrance to cave applied clay brick carved to build.In addition carve a piece with The clay brick can not mix to carve.Fill another wall body and of pillar to use to pull a Jin conjunction. 5.4Decorate engineering 5.4.1All adornment engineering the construction all should strictly carry on and do a sample product first according to the work method and check and accept by everyones noodles qualified The square can carry on a big area construction after.Outside decorate press from up arrive bottom in proper order carry on, inside decorate press first crest Peng wall noodles after ground Of sequence, organize a flowing water construction according to the floor. 5.4.2The indoor paints construction according to first crest after the Peng wall noodles again the sequence of ground carry on.Put ash a round flat cake blunt Jin first, wall noodles matter Is first appropriate and moist, the layering carries on while painting and ensure that painting is neat and clean and glues to knot firm, before carrying on a coating construction, Want a forerunner to go a grass-roots surface processing. The grass-roots surface has to be hard and have no crisp loose, shed skin, rise the hull, powder turn an etc. phenomenon, miscellaneous articles or objectses, such as mud and dust...etc. dirty vestige, Have to wash clearance clearly, the surface has neat request, but should not be too smooth again, before brushing coating, brush first a with coating body Fastenning is mutually accommodative of blunt sparse of lotion, deeply ooze abilit