测量设备英语表示.docVIP

主要量测设备 三次元量床 (Coordinate Measuring Machine) - CMM 齿轮测试机 (Gear Tester) 高度规 (Height Gauge) 光学投影机 (Optical Profiler)/(Profile Projector) 表面粗度仪 (Roughness Tester) 硬度机 (Hardness Tester) 微小硬度机 (Micro-hardness Tester) 光学显微镜 (Optical Microscope) 动平衡测试机 (Dynamic Balance Machine) 扭力测试机 (Torque Tester) 轮廓仪 (Contour measuring Instrument) 流量测试机 (Oil pump tester) 真圆度机 (Roundness measuring instrument) 齿轮测试机 (Gear tester) 分光仪 (Specturmmeter) 游标卡尺 (Caliper) 分离卡 (Micrometer) 杠杆式量表 (Dial test indicator) 角度规 (Angle Protractor) R规 (Radius Gauge) 指示量表 (Dial Indicator) 缸径规 (Dial Bore Gauge) 厚薄规 (Thickness Gauge) 螺纹塞规 (Screw Gauge) 盘式分厘卡 (Disk Micrometer) 表面粗度计 SURFACE ROUGHNESS TESTER (Hommel Tester T1000) The tester print out the measuring results through - 1) PARAMETERS 2) ROUGHNESS PROFILE 投影机 PROFILE PROJECTOR It is a two axis measuring instrument. This system can be sued for checking shapes, profile, relief and intented surface on medium and small sized pieces. 真圆度机 ROUNDNESS MEASURING INSTRUMENT Measuring the CIRCULARITY (真圆度) 轮廓仪 CONTOUR MEASURING INSTRUMENT It is basically measuring the angles of items. 分厘卡 MICROMETER – (External) (Internal) This measurement can be measured for Thickness, Outer diameter and internal diameter. The number of measuring result was up to three decimal places. 游标卡尺 CALLIPER Measure for Thickness, Outer diameter and Inner diameter The number of measuring result was up to two decimal places. 高度规 HEIGHT GAUGE Two-dimensional measuring machine Measuring the distance between any two points through the contacts of probe 硬度计 HARDNESS TESTER Measuring the hardness by the standards as follow: HRa(60kg), HRb(100kg), HRc(150kg) 缸径规 Dial Bore Gauges Measuring the internal diameter A dial bore gauge does not provide a direct measurement. It indicates the amount of deviation from a preset size or dimension of one bore to another. 三次元 CMM (COORDINATE MEASURING MACHINE) A 3 axis computer numerical controlled (CNC) coordinate measuring machine (CMM) that is used to