CC2530官方开发板说明书及原理图.pdfVIP

CC2530 Development Kit User’s Guide swru208b swru208b Table of contents CC2530 Development Kit User’s Guide 1 1 Introduction 3 2 About this manual 3 3 Acronyms4 4 Development Kit contents5 5 Getting started7 5.1 Setting up the hardware7 5.2 Running the Preprogrammed PER Test on the CC2530EM 8 5.3 Evaluate the CC2530 Radio using SmartRF Studio9 5.4 Setting up the Software Development Environment11 6 RF Testing12 6.1 TX Parameter Testing Basics 12 6.2 RX Parameter Testing Basics13 7 CC2530EM14 8 CC2531 USB Dongle15 9 SmartRF05 Evaluation Board17 10 Frequently Asked Questions 18 11 References21 12 Document history21 Appendix A Setting up the Software Environment 22 A.1 Create the project22 A.2 Project Options23 A.3 Select Device 23 A.4 Select Code and Memory Model24 A.5 Configure the Linker 26 A.6 Configure the Debugger 27 A.7 Write Software28 A.8 Compile and Debug29 A.9 Done! 29 Appendix B Software Solutions for CC2530 from TI30 B.1 SimpliciTI™Network Protocol30 B.2 TIMAC Software 30 B.3 RemoTI™Network Protocol 31 B.4 Z-Stack™Software 31 Appendix C Schematics33 2/33 swru208b 1 Introduction Thank you for purchasing a CC2530 Development Kit. The CC2530 is Texas Instrument’s second generation ZigBee/IEEE 802.15.4 compliant System-on- Chip with an optimized 8051 MCU core and radio for the 2.4 GHz unlicensed ISM/SRD band. Th