理光10151018（Ricoh 10151018）.docVIP

理Ricoh Ricoh 1015/1018 ir5570 Fault code SC-101 exposure light SC-120 scanner error 1 error in situ SC-121 scanner in situ error 2 SC-122 scanner in situ SC-123 scanner in situ error 4 error 3 Communication error between SC-130 BICU and SBU, SC-192 automatic SBU adjustment error, SC-194 SBU white level detection error, SC-302 charging roller leakage, SC-320 multi angle mirror error SC-321 no laser write signal (F- gate error, SC-322 laser synchronization error, SC-390 TD sensor error, SC-391 print bias voltage leakage, SC-392 TD sensor initial error occurred SC-401 transfer roller leakage error 1 SC-402 transfer roller leakage error 2 SC-001 main motor lock SC-503 on paper tray lifting motor fault SC-504 paper tray lifting motor fault SC-506 paper disc motor lock SC-541 fuser thermostat / thermistor open circuit SC-542 fusing temperature preheating error SC-543 fixing overheating error SC-544 fixing low temperature error SC-546 unstable fixing error, SC-547 zero crossing signal failure, communication error between SC-620 IOB and AFD, bad communication between SC-691 BICU and fax controller Bad communication between SC-692 BICU and printer controller, SC-695 fax fixed error, SC-ADF gate exception, SC-900 total electrical counter error, SC-901 mechanical total counter SC-921 IMB memory control error, SC-922 IMB DRAM error, SC-924 optional DRAM error, SC-925 IMB, connectionless error SC-926, memory capacity error SC-981 NVRAM error, communication between SC-990 BICU and IOB error, SC-999 program version error A: SP maintenance mode (enter maintenance mode: press the total clear key, --1-0-7-- stop key, 5 seconds) SP1 (send in mode) 001: head edge alignment [-9.0-9.0/0.1MM/ level] [1] carton feed [2] hand feed paper tray feed paper [3] double feed 002: about [-9.0-9.0/0.1MM/ grade] [1] first paper disk, [2] second paper disk, [3] third paper disk, [4] fourth paper disk, [5] hand feed paper tray, [6] double sided 003: send paper timing, adjust the amo