ABB编程电缆驱动TK503_TK504_Driver_Installation.pdfVIP

Installation Instruction AC500 Scalable PLC for Individual Automation USB Driver Installation Programming Cables TK503/TK504 abb Content Introduction and Basics2 Intended Use 2 Description 2 PC System Requirements 2 Content of the Installation Package 2 Installation3 Installation Steps 3 Pre-Installation Routine 3 Driver Installation Routine 5 Communication7 Virtual Communication Port Configuration 7 CoDeSys Communication 9 Update12 Uninstallation 13 Installation Instruction 1 Programming Cables TK503/TK504AC500/Issue: 07.2010 Introduction and Basics Intended Use The TK503/TK504 Programming Cable is used to transfer data between the PLC and a PC or laptop. It is used for programming purpose. Description The TK503/TK504 Programming Cable can be used to operate and configure the PLC via a PC or laptop. In order to do this, the CoDeSys software, driver and utility programs must be installed and a TK503/TK504 Programming Cable must be connected. PC System Requirements  Platform: Microsoft XP • CD-ROM drive • USB port available for connecting the TK503/TK504 Programming Cable Microsoft, Windows and the Windows logo are trademarks of Microsoft Corporation in the USA and/or other counties. All other product and company names are trademarks of their respective owners. NOTICE Content of the Installation Package Installation Instruction 2 Programming Cables TK503/TK504AC500/Issue: 07.2010 Installation Installation Steps Before you can use the TK503/TK504 Programming Cable, the appropriate USB driver must be installed on your