专业录音水平的乐器和人声.docVIP

专业录音水平的乐器和人声 How to record professional recording instruments and human voices on your computer? 1, wooden guitar: the sound recorded by the wooden guitar is good or bad, 90% of which is related to the quality of MIC and the position of microphone. Use two MIC, one as the main MIC, and the other as the background MIC. The main point to 14 MIC vertical panel guitar, the specific location is determined according to the volume, the music style of guitar and MIC sensitivity, picks when playing than fingerstyle slightly away from 5-10CM. The background of MIC in the 1.5 meters, is sound. The quiet recording environment and playing state must be ensured. Of course, the fingers are not noisy, so there is no need to worry about this. Note: the main point is close to the MIC sound, bass picked up more rich, suitable for chord recording; on the other hand, bass and thin, suitable for sweeping strings (rhythm) recording. By properly lifting the EQ value of the console 2-5KHZ, you can make the tone of the wooden guitar more crisp and bright. 2, electric box guitar: MIC recording, with the wooden guitar, line recording, see the electric guitar. 3. Electric guitar: (1) MIC recording: the sound of the guitar in the MIC recording box. It is best to add a background MIC to the recorded tone. MIC placement, I mentioned earlier, to fumble, and the volume of the speaker is also directly related to the quality of recording. (2) line recording: electric guitar, effector, console, sound card, linear input port. The balance and recording level of the electric guitar effector and console must be set properly, otherwise the recording will be very bad. 4, Beth (BASS): wood BASS and electrical BASS MIC recording, see the relevant parts above. Note that MIC should choose the bass type. Line recording: basic circuit recording with electric guitar. With a hammer (beat) string technique to enhance the BASS performance, 4-7kHz EQ mixer faders, make clear sound head. 5, drum: This is one of the most