一般石灰浆、大白浆、可赛银浆、聚合物水泥浆等刷(喷)浆工程（Lime pulp, large white pulp, silver paste, polymer cement slurry brush (spray)）.docVIP

一般石灰浆、大白浆、可赛银浆、聚合物水泥浆等刷(喷)浆工程（Lime pulp, large white pulp, silver paste, polymer cement slurry brush (spray)） Lime pulp, large white pulp, silver paste, polymer cement brush this technology is applicable to industrial and civil engineering (spray) pulp. Construction preparation: 2.1 material requirements: 2.1.1 block or lime lime powder: used for ordinary brush (spray) pulp project. 2.1.2: big white building materials store products supply, there are square and round points, according to the need to buy. 2.1.3: building materials store silver to match the supply of finished products. 2.1.4: building gypsum building materials store supply, is a rigid gas cementing material. 2.1.5: talcum powder fineness, 140 ~ 325, whiteness is 90%. 2.1.6 adhesive: polyvinyl acetate emulsion, carboxymethyl cellulose, flour, etc.. 2.1.7 color: yellow iron oxide, iron oxide red, ultramarine blue, white, green, yellow complex, with strong hiding power, light resistance, alkali resistance, climate impact of various mineral pigments. 2.1.8: General brush lime salt for ordinary white pulp caustic soda, white cement or ordinary cement etc.. 2.2 main equipments: 2.2.1 should normally have a hand pump or electric spraying machine, large pulp barrels, small pulp barrels, brush, brush, plastic surgery, rubber scraper, scraper, No. 0 and l, 50 ~ 80 mesh wood sandpaper, wire baskets, slurry tank, the size of the bucket, rubber tube, pliers, wire, putty, groove putty pallets, broom, cloth, cotton yarn etc.. 2.3 operating conditions: 2.3.1 indoor plastering work work has been completed, the basic wall should be dry, the moisture content of not greater than 10%. 2.3.2 indoor plumbing, electrical embedded presupposition has been completed, and the completion of pipe hole plastering live repair. Head over oil 2.3.3 oil industry has been finished. 2.3.4 construction of large area well in advance before the model, by the relevant departments to check the quality of qualified party identification, constr