在dos下用ghost还原（Restore with ghost under DOS）.docVIP

在dos下用ghost还原（Restore with ghost under DOS） To install Ghost and then start the machine to a pure DOS mode, and does not load any application and execution of Ghost.exe files, Ghost shows the main screen, select the Local - Partition - To Image , the screen displays the hard disk partition and select screen select screen, please according to need to select the hard disk backup source disk and the partition name (if only a piece of hard disk and press the Enter key) and then displayed on the screen image file storage screen, you can select the appropriate target disk and file name, the default extension for GHO, and the property is implied. Then you can choose No in the compressed image file in the dialog box (no compression), Fast (low compression ratio, speed), High (high compression ratio, the slower) one of the three, should be based on their own machine configuration to decide, in the final confirmation dialog box Yes, image file start generating. Files can be started or copied to your computer using disk, which is a non system disk Reinstall the system steps 1 make the startup disk. (winme startup disk is not used, because winme does not support DOS, so make the best startup disk in Win98, but also winme startup disk can be used) to open my computer, control panel, add and delete the program Select the startup disk created in the startup disk item, and then start the disk production even if its done 2 restart the computer and press del to enter the BIOS settings at boot time and adjust the boot sequence to boot from floppy disk Led by CD-ROM two, hard disk for three (boot, first--Floppy,..second--CD-Rom,..third--IDE-0) After pressing ESC, press F10 to save the BIOS settings. 3 in the heavy lifting, quickly put in just made a good boot disk, the system will automatically perform it, after a large series of self-examination, straight To the prompt, A:\ Then dont touch, see what is your CD-ROM letter, usually, by your hard disk partition, such as your hard disk Pa