TITAN MODEL 10 Venture Trailers（泰坦模型10风险预告片）.pdf

INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future reference. TITAN MODEL 10 SURG-O-MATIC ACTUATOR FOR TRAILER BRAKES INTRODUCTION TO SURGE BRAKING Surge braking is accomplished by replacing a trailers standard tongue coupler with an actuator and adding hydraulic brake assemblies. The surge or push of the trailer toward the tow vehicle during deceleration automatically synchronizes these trailer brakes with the tow vehicle brakes. As the trailer pushes against the vehicle, the actuator telescopes together and applies force to its master cylinder, supplying hydraulic pressure to the trailers brakes. Surge actuators of this type provide a service life of approximately five years with proper installation, usage, and maintenance. However, a well cared-for actuator can often exceed this estimate. To get the most benefit from your TITAN surge actuator, follow the instructions given in this manual and use common sense in caring for the TITAN MODEL 10 actuator and your entire trailer brake system. RATED CAPACITY AND USAGE 10,000 POUNDS MAXIMUM GROSS LOAD (weight of the trailer fully loaded with all cargo and equipment). To find your trailers Gross Load, use a commercial vehicle scale at a truck weigh station, grain elevator, etc. 800 POUNDS MAXIMUM TONGUE LOAD (weight applied downward by the fully loaded trailers coupler onto the tow vehicles hitch). Your trailer’s tongue load may be checked using a commercial scale. Make sure the tongue is in horizontal position and