STRUCTURAL ANALYSIS, WITH DIFFERENT （结构分析,不同）.pdfVIP

Int. Journal for Housing Science, Vol.35, No.3 pp. 149158, 2011 Published in the United States STRUCTURAL ANALYSIS, WITH DIFFERENT INTERNATIONAL STANDARDS, OF BUILDINGS SUBJECTED TO SEISMIC LOADS M. C. G. Pastor, C. F. Fernández Department of Research Development CYPE Ingenieros, Alicante Spain ABSTRACT This article provides an analysis of a softwaremodelled reinforced concrete residential building, which has characteristics that would allow it to be constructed in different countries. The model was subjected to a high level of earthquake loading with properties specific to its site of construction. Using applicable and compatible earthquake and reinforced concrete codes, results were obtained and compared. The comparison results range from the consideration of seismic forces to the quantities of steel reinforcement required to strengthen the structural elements by examining their impact per square meter. In this study, CYPECAD, a software program from CYPE Ingenieros (), was used as a tool for calculating the seismic response of the structure according to the seismic codes from a selection of countries in Europe, Northern Africa, and South and Central America. It was concluded that the seismic action depends heavily on the definition of the spectrum and the variability