STENFLEX Main Catalog A07 Deutsch Hanwel （多伊奇A07 Hanwel STENFLEX主目录）.pdfVIP

Technical annex Movement and force at compensators Movement Before opting for a compensator type, When choosing a compensator the The interrelation of superimposed an- it is important to decide on how a following types of movement must be gular and axial movement is shown in change in length of a pipe system is to considered: diagram . be compensated. ■ axial movement Steel compensators The choice of the compensator type ■ lateral movement If axial and lateral movement are si- depends essentially on the securring ■ angular movement multaneously introduced into a steel expansion, on the routing of the pip- compensator (superimposed move- Rubber compensators ing system and on the space avail- ment), the lateral share is converted able. If both axial and lateral (superim- by an equation into an equivalent axi- posed) movement are simultaneously al path and must not exceed 100 % Pipe expansion can be absorbed by introduced into a rubber compen- when added. shift and deflection of a certain type of sator, its maximum extension in the Please contact our Technical Consul- compensator. axial direction and its ability to absorb tation Service. the highest rated movement are re- duced (see diagram ). l e v a r t