Specification of DYPME003 Elecfreaks（规范的DYPME003 Elecfreaks）.pdfVIP

Tech Support: services@ Specification of DYP-ME003 1 Electrical parameters Product Type HC--SR501 Body Sensor Module Operating voltage range DC 4.5-20V Quiescent Current 50uA Level output High 3.3 V /Low 0V L can not be repeated trigger/H can be repeated Trigger trigger(Default repeated trigger) 5-200S(adjustable) the range is (0.xx second to tens of Delay time second) Block time 2.5S(default)Can be made a range(0.xx to tens of seconds Board Dimensions 32mm*24mm Angle Sensor 100 ° cone angle Operation Temp. -15-+70 degrees Lens size sensor Diameter:23mm(Default) 2 Features: 1, the automatic sensor: to enter the sensor output range is high, people leave the sensor range of the automatic delay off high, output low. 2, the photosensitive control (optional, factory is not set) may set the photosensitive control during the day or light intensity without induction. 2011-6-3 1 www.ElecFrecF Tech Support: services@ 3, the temperature compensation (optional, factory is not set): In the summer when the ambient temperature rises to 30 ~ 32 ℃, slightly shorter detection range, temperature compensation can be used as a performance compensation. 4, two trigger mode: (can be selected by jumpers) a. can not repeat the trigger: the sensor output high, the delay time is over, the output will automatically become low from high;