Microstructural analysis, micro hardness and （微观结构分析、显微硬度和）.pdfVIP

Int. Journal of Applied Sciences and Engineering Research, Vol. 3, Issue 3, 2014 © 2014 by the authors – Licensee IJASER- Under Creative Commons License 3.0 editorial@ Research article ISSN 2277 – 9442 Microstructural analysis, micro hardness and tensile strength of silicon carbide and zirconium silicate dual reinforced particle ADC-12 alloy composite 1 2 3 Surendra Kumar patel , Ravi Kumar , Raman Nateriya M. Tech. Scholar, Department of Mechanical Engineering, MANIT, Bhopal, MP, India1 M. Tech. Scholar, Department of Mechanical Engineering, MANIT, Bhopal, MP, India2 Assistant Professor, Department of Civil Engineering, MANIT, Bhopal, MP, India3 DOI: 10.6088/ijaser.030300016 Abstract: The aim of this study is to determine the tensile properties of silicon carbide (SiC) and zirconium silicate (ZrSiO ) particulate reinforced with ADC-12 alloy composite. In this experimental study, SiC and 4 ZrSiO4 particulates reinforced with ADC-12 composite were manufactured by stir casting methods. Tensile properties of these composite materials were investigated by different weight percentages, 3%, 6%, 9%wt silicon carbide (SiC) and 9%, 6%,3% wt of zirconium silicate (ZrSiO ) respectively. The tensile tests 4 were conducted to determine tensile strength and young’s modulus to investigate the effects of reinforce materials on weight percentages. The outcome of the investigations reveals that the te