MDG 33.7 Examination, testing retirement of （目标33.7考试,测试的退休）.pdfVIP

GUIDELINES MINE WINDERS PART 7: EXAMINATION, TESTING RETIREMENT OF ROPES MDG 33.7 This version has been submitted to the Coal Safety Advisory Committee (CSAC) and is issued for industry comment. Any comments should be forwarded by 30 November 2011 to Lyndon Hughes at: lyndon.hughes@.au This guideline is expected to be published in December 2011. PUBLICATION HISTORY – First published November 1994 as MDG 26, Guidelines for examination, testing and discard of mine winder ropes - For use in coal mines – Revised February 1999 – Redesignated as Draft MDG 33.7, Mine Winders – Part 7: Guideline for examination, testing and retirement of mine winder ropes DISCLAIMER The compilation of information contained in this document relies upon material and data derived from a number of third party sources and is intended as a guide only in devising risk and safety management systems for the working of mines and is not designed to replace or be used instead of an appropriately designed safety management plan for each individual mine. Users should rely on their own advice, skills and experience in applying risk and safety management systems in individual workplaces. Use of this document does not relieve the user (or a person on whose behalf it is used) of any obligation or duty that might arise under any legislation (including the Occupational Health and Safety Act 2000, any other act containing requirements relating to mine safety and any regulations and rules under those acts) covering the activities to which this document has been or is to be applied. The information in this document is provided voluntarily and for information purposes only. The New South Wales Government does not guarantee that the information is complete, current or correct and accepts no responsibility for unsuitable or inaccurate material that may be encountered. Unless otherwise stated, the authorised version of al