Local, Distortional and Overall Buckling of Cold （地方、畸变和整体屈曲的冷）.pdfVIP

THIN-WALLED COLUMN DESIGN CONSIDERING LOCAL, DISTORTIONAL AND EULER BUCKLING 1 B.W. Schafer ABSTRACT Open cross-section, thin-walled, cold-formed steel columns have at least three competing buckling modes: local, distortional, and Euler (i.e., flexural or flexural-torsional) buckling. Current North American design specifications for cold-formed steel columns ignore local buckling interaction and do not provide an explicit check for distortional buckling. Closed-form prediction of the buckling stress in the local mode, including interaction of the connected elements, and the distortional mode, including consideration of the elastic and geometric stiffness at the web/flange juncture, are provided and shown to agree well with numerical methods. Numerical analyses and experiments indicate post-buckling capacity in the distortional mode is lower than in the local mode. Existing experiments on cold-formed channel, zed, and rack columns indicate inconsistency and systematic error in current design methods and provide validation for alternative methods. A new method is proposed for design that explicitly incorporates local, distortional and Euler buckling, does not require calculations of effective width and/or effective properties, gives reliable predictions devoid of systematic error, and provides a means to introduce rational analysis for elastic buckling prediction into the design of thin-walled columns. INTRODUCTION Compared with conventional structural columns, the pronounced role of instabilities complicates behavior and design of thin-walled columns. E