Influence of the Geometry Parameters of Cardan （万向节的几何参数的影响）.pdfVIP

Influence of the Geometry Parameters Zoran Stamenić of Cardan Joint Rolling Parts on the Teaching Assistant University of Belgrade Load Distribution Faculty of Mechanical Engineering Mileta Ristivojević Cardan joints have a wide range of applications in mechanical Full time Professor engineering because of the capability of transferring the load and motion University of Belgrade from one shaft to another with different joint angle. The vital parts of these Faculty of Mechanical Engineering joints have a limited life due to insufficient surface strength in the area of Milan Tasić rolling parts contact. Load distribution of Cardan joints composite parts Professor have a major impact on their capacity and service life. Therefore, a Tehnikum Taurunum detailed analysis of load distribution along the line of contact between College of Applied Sciences Cardan Cross pins and rolling parts – needles, was carried out in this Belgrade paper. Appropriate analytical and numerical models are developed. Based Radivoje Mitrović on the developed models, it is possible to optimize the geometrical Full time Professor parameters in terms of uniformity of load distribution of Cardan joints University of Belgrade comp