HETP Evaluation of Structured and Randomic （结构化和Randomic HETP评价）.pdfVIP

3 HETP Evaluation of Structured and Randomic Packing Distillation Column Marisa Fernandes Mendes Chemical Engineering Department, Technology Institute, Universidade Federal Rural do Rio de Janeiro Brazil 1. Introduction Packed columns are equipment commonly found in absorption, distillation, stripping, heat exchangers and other operations, like removal of dust, mist and odors and for other purposes. Mass transfer between phases is promoted by their intimate contact through all the extent of the packed bed. The main factors involving the design of packed columns are mechanics and equipment efficiency. Among the mechanical factors one could mention liquid distributors, supports, pressure drop and capacity of the column. The factors related to column efficiency are liquid distribution and redistribution, in order to obtain the maximum area possible for liquid and vapor contact (Caldas and Lacerda, 1988). These columns are useful devices in the mass transfer and are available in various construction materials such as metal, plastic, porcelain, ceramic and so on. They also have good efficiency and capacity, moreover, are usually cheaper than other devices of mass transfer (Eckert, 1975). The main desirable requirements for the packing of distillation columns are: to promote a uniform distribution of gas and liquid, have large surface area (for greater contact between the liquid and vapor phase) and have an open structure, providing a low r