Design and Strength of Brazed Joints jm （设计和钎焊的接头jm的力量）.pdfVIP

Design and Strength of Brazed Joints M. H. Sloboda Johnson Matthey Co Limited, London Revision of an article first appearing in Welding and Metal Fabrication July 1961 I JOHNSON MATTHEY METALS LIMITED II Design and Strength of Brazed Joints M. H. Sloboda Johnson Matthey Co Limited, London Revision of an article first appearing in Welding and Metal Fabrication July 1961 1 JOHNSON MATTHEY METALS LIMITED 2 Design and Strength of Brazed Joints M. H. Sloboda Johnson Matthey Co Limited. London Brazing has become an indispensable tool of the metal problems of both design and fabrication of brazed fabrication engineer, one of the main advantages of assemblies are approached with the attitude of mind this production method being its versatility associated acquired in dealing with welding problems, it would with the large variety of the brazing materials and seem desirable, before discussing the problem under techniques available to the prospective user. consideration, to stress one of the basic differences Not so long ago, the 50 50 brass was the only between brazing and welding which is relevant to the industrial brazing alloy; a list of all the brazing alloys subject of the present article. that have subsequently been developed would run into In any autogenous we