DESIGN AND CONSTRUCTION OF DOOR （设计和施工的门）.pdfVIP

www.ijecs.in International Journal Of Engineering And Computer Science ISSN:2319-7242 Volume 2 Issue 7 (July 2013), Page No. 2235-2257 DESIGN AND CONSTRUCTION OF DOOR LOCKING SECURITY SYSTEM USING GSM Ushie James Ogri, Donatus Enang Bassey Okwong, Akaiso Etim Department of Physics, University of Calabar, ushjames@ ABSTRACT This project presents a prototype security door that can be remotely controlled by a GSM phone set acting as the transmitter and another GSM phone set with a dual tone multi-frequency (DTMF) connected to the door motor through a DTMF decoder interfaced with microcontroller unit and a stepper motor .The design is composed of four main functional modules, namely; the GSM module, the decoding module, controlling module and the switching module. The GSM module act as both transmitting and receiving unit employs the use of a mobile phone set serving as the communication device between the user at one end and the object of access (i.e. the door) at the other receiving end. The decoding module and the controlling module are made possible using modern integrated circuit chips ensuring proper conversion of signal to binary codes, enabling the microcontroller to communicate properly with the switching device responsible for opening and closing the door. The codes for this project was written in assembly language with Visual basic software and compiled with M-IDE studio for MC-51compiler which work perfectly with Window XP environment, the program run without error before it was burn onto the microcontroller using a device called the programmer by placing the microcontroller on it socket equal to the pin number. Keywords: Door Locking, Security, GSM, Microcontroller and Stepper Motor INTRODUCTION: Security describes protectio