Creo MOLDESIGN ProETutorials（Creo MOLDESIGN ProETutorials）.pdfVIP

Creo MOLDESIGN Creo MOLDESIGN tutorials have been developed with Prerequisites great emphasis on the practical application of the software to solve real world problems. The self-study course starts The user should have basic concepts in the following from the very basic concepts and teaches advanced techniques step by step. After completing these tutorials an 1) Solid Modeling Engineer or Designer will be able to create the advanced 2) Surface Modeling parting geometry, split the mold into Core and Cavity 3) Assembly halves, create Sliders and Lifters, define multi-cavity molds, create runners, gates, sprue, cold slugs, create cooling Stats channel and check their clearance from neighboring surfaces. Following are the stats for Creo 1.0 The training material is divided into sections. Each section Total Pages: 660 is accompanied with exercises to practice the concepts learned. Total Exercises: 38 1. Introduction 2. Parting Surfaces a. Manual Parting Surfaces b. Automatic Parting Surfaces 3. Sliders and Lifters 4. Multi-Cavity Molds 5. Feed System and Molding 6. Water Line and Ejector Pins 7. Mold Analysis 8. Mold Layout And EMX INTRODUCTION The Introduction section elaborates the following concepts.  Manufacturing model  Reference model  Shrinkage  Automatic workpiece  Concept of Accuracy in Creo MOLD  Analyzing a part for its moldability  Concept of Parting Surface  How a split works  Creating mold components EXERCISE 1 In this exercise user will practice the following  Creating a new manufact