工程施工规范样本（Standard construction sample）.docVIP

工程施工规范样本（Standard construction sample） Engineering construction standard sample The company will be in the construction of the project in strict accordance with the systems engineering technical specifications civil closed circuit monitoring TV GB51098 94 mandatory national standards, the system wiring do comply with the regulations of the state electrical installation engineering construction and acceptance norms and other national norms and regulations. The whole system equipment, power supply, signal channel according to the national standard of lightning protection, anti continuous lightning. All tubes must wear line pipe, tank protection, power supply line must be in charge of laying galvanized metal or flame retardant materials use norms and regulations promulgated by the state press tube and groove. 1. construction key points and difficulties and coping measures 1) due to the construction of a large amount of time is tight, need to cooperate with the construction unit, we appoint someone to track each unit construction schedule, construction fill in daily schedule, in close coordination with the construction units. 2) wiring system construction progress because of the need to cooperate with the decoration engineering, equipment installation and wiring work required a longer time interval, has laid line can be damaged, so the equipment must be installed on the line maintenance, re measurement. 3) due to a larger number of wiring cables, the cables are required to make a mark, the internal terminal box required to make marks to facilitate the maintenance of the bridge; vertical lashing solid, horizontal bridge cable cloth neatly. 4) by the cable weight per unit length is larger, the line length is longer, is placed with a correspondingly larger resistance, sheath, in order to avoid the core damage, is placed at the same time to more drag, not focus on both ends of the delivery. 5) branch line design of bridge laying, the indoor intercom point, line bridge a hol