复印机维护保养（Copier maintenance）.docVIP

复印机维护保养（Copier maintenance） Copier maintenance,.Txt is in a bad mood today. I have only four words to say. Include this sentence and the preceding two sentences. My word is finished, to deal with evil people, will be more vicious than him; to deal with despicable people, it is more despicable than he, no Valentines taste, where the human touch, what the whole death of you, my love. No change, said the cashier. Two plastic bags for you.! The copier needs maintenance when the copy reaches a certain amount or the quality of the copy drops significantly. The machines are not prone to damage and maintain satisfactory copy effects only when they are properly maintained and maintained. The general sense of using a copier We should also note that the correct use of everyday methods is particularly important. 1, choose the right place to install copy, to pay attention to the anti high temperature, dustproof, shockproof, anti sun, at the same time to ensure good ventilation environment, because the copy machine will produce micro ozone, and the operator should each work for a period of time to the outdoor air rest for a moment. Usually as much as possible to reduce the movement, to move, you must move horizontally, not tilt. In order to ensure the best operation, at least 90 centimeters should be left around the machine, leaving 13 cm of space on the back (such as a machine with a pager, about 23 cm distance) The operation and use of copiers should be careful. 2, should use the stable alternating current connection use, the power supply quota should be: 220-240V, 50Hz, 15A. 3, every morning after work, you should open the copier preheating preheat half an hour or so, keep the copier dry. 4, to keep the copier glass stand clean, no scratches, can not have correction fluid, finger prints and other spots, otherwise it will affect the copy effect. Clean glass with soft glass cleaning if spotted. 5, in the process of copying work, be sure to cover the top of the block, in order to