吹塑成型（Blow molding）.docVIP

吹塑成型（Blow molding） At present in the blow molding industry development, as many kinds of blow molding products related to energy and resource efficiency and meet the higher standard of theme. In addition, to ensure that the technical innovation leading engineering solutions, especially the design of sustainable development processes and products, play an important role in the future will be. In order to respond flexibly to changes in products and materials, packaging manufacturers need to have sufficient flexibility to meet the requirements of the system. In order to hollow products manufacturing volume of 10 liters, Germany Berlin Bekum machinery factory has adopted a series of X (E) with all electric and hydraulic drive (HY) function of the machine. The clamping device is wear free and stable C framework based on the design, it will allow the directional force transfer to the die area, which has perfect parallelism. If you use an optional downward blow station, it can achieve up to 20000 bottles per hour output. Moreover, in a series of blowing process, allowing the calibration of the blow molding products from the top and bottom. In addition, it can effectively manage energy blow line in all electric mode. Compared with the hydraulic operation of blow molding machine, blow molding machine, all electric energy savings up to 50%. Compact machine series KCC Germany Bonn Kautex Machinery Manufacturing Co., also can be flexibly used in the production of civil and industrial packaging, size from 50 ml to 30 liters can, which can make the machine produces a large number of different products. Extrusion and blow molding line in China Chinaplas KCC15D on this series, equipped with a 6 layer of mould head in the two layer DECO configuration. This machine is suitable for processing all traditional blow molding material and volume of 50 ml to 5 liters of the production of consumer goods packaging. With this model, a single extruder can produce a decorative layer, so it can n