ormonns10（Ormonns10）.docVIP

ormonns10（Ormonns10） Touch screen reasons: A.NS series, the use of CX-Designer software, in the transmission settings, select transmission mode, serial port or USB, etc.. Using USB to download, you need to install the USB driver; The b.NT31 (C) /631 (C) series uses the NTST software to confirm the error logs or prompt information (PT type mismatch), and correct changes based on prompt information. When downloading, it indicates Time Out. The cable can only be inserted into the A port of the touch screen. The touch screen will enter the system menu at any two angles, and select the transmission mode. The previous download was interrupted without completion. This time you cant download the program, enter the system menu, and select initialization; C.NT5Z/NP series, using NTZ-DESIGNER/NP-DESIGNER software, in the options to select transmission mode, serial port or USB. Use the serial port to download, press the system key to enter the system menu, enter the transmission mode, select the serial port which is transmitted on the touch screen. Use USB to download and install the USB driver. Computer reasons: A. the cable is damaged and the connection is wrong. Please check the connection; B. software, select the computer to download the COM port used; C. uses USB to turn 232 adapters to confirm that the USB driver is installed, and other company converters may not be compatible. It is recommended to use OMRONs CS1W-CIF31 adapter. NS how to reinstall and upgrade the system program? -------------------------------------------------------------------------------- Need to use the CF card, Designer programming software corresponding to the installation directory: Copy all the files under the C:\Program Files\OMRON\CX-One\CX-Designer\RecoverUpdate_6_6 to the CF card, NS power plug CF card, and then NS, NS will automatically read, choose to upgrade the covering system NS and computer and 232 serial connection with PLC, cable type and manufacturing method -------------------------