lt6100设置频率的方法(上下行、哑音全设置)（Lt6100 method of setting frequency (up, down, mute, full set)）.docVIP

下载本文档

6
0
约6.99千字
约 11页
2017-08-15 发布于河南
举报
版权申诉

lt6100设置频率的方法(上下行、哑音全设置)（Lt6100 method of setting frequency (up, down, mute, full set)）.doc

1、有哪些信誉好的足球投注网站（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。。
2、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
4、该文档为VIP文档，如果想要下载，成为VIP会员后，下载免费。
5、成为VIP后，下载本文档将扣除1次下载权益。下载后，不支持退款、换文档。如有疑问请联系我们。
6、成为VIP后，您将拥有八大权益，权益包括：VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
7、VIP文档为合作方或网友上传，每下载1次，网站将根据用户上传文档的质量评分、类型等，对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档

lt6100设置频率的方法(上下行、哑音全设置)（Lt6100 method of setting frequency (up, down, mute, full set)）

lt6100设置频率的方法(上下行、哑音全设置)（Lt6100 method of setting frequency (up, down, mute, full set)） Hand activity frequency: 437.900MHz, 409.8500MHz, emergency standby frequency frequency 438.500MHz LT6100 method of setting frequency (up, down, mute, full set) 1, press the [V/M] button to enter full frequency mode (VFO mode). Press the numeric key to enter the desired down frequency. 2, press the [F]+[5] key to choose the difference + or the next difference -, repeatedly press the [F]+[5] button to achieve +, - and no in turn. 3, press the [F]+[9] key to enter the menu mode, then press up and down arrow to the sixteenth menu, and then press the [F] key to modify the pattern of differential frequency input required value, press [F] to confirm, press the two key outside except the side of any key to exit, so far have been set on the downlink frequency. 4, press the [F]+[6] key to set the tone, press up and down arrow followed by OFF, TONE (emission band CTCSS, receiving no CTCSS), CTCSS (transmitting and receiving with analog mute), D CODE (emission band cdcss, receiving no digital tone), DCS (transmitting and receiving with cdcss), T DCS (Emission Simulation mute, receiving digital mute) and D TSQL (transmit digital mute, mute, choose to receive analog) after confirmation by pressing the [F] key, the upper right corner of the screen should appear CT or DCS. 5, according to [F]+[7], enter the dummy value menu, press up and down arrow keys to select the value should be set up, choose the confirmation after press [F]. For CTCSS and DCS and T DCS and D TSQL to set respectively for receiving and transmitting sub sub value and value, TONE and D CODE to set emission. 6, after setting up, press the [F] button, the upper left corner of 001 and the lower left corner of F flashing at the same time, you can press the up and down arrow keys to select the channel to be deposited, and finally stored by [V/M]. Remember, press the [V/M] key to store it. Description of the 29 menu for LT6100PLUS