领带的制作（Necktie making）.docVIP

领带的制作（Necktie making） One, the main production tools of the brand The The basic tools of production: the production of tie The AP 1, cutting bed: wood, three plywood or MDF made, about 80 to 100 centimeters high, about 120 to 160 centimeters wide (for easy cutting, folding can be made), and the length is determined according to the size of production. The brand of the brand 2, scissors: 28 to 31 cm long, more suitable for cutting fabric. Small yarn scissors, sewing line is more convenient. The brand of the brand 3, cutting: cutting and cutting knife round two. Straight up and down, and is suitable for hard cloth production. Round cutting forward, suitable for soft cloth. The brand of the brand 4, layering, clip forceps: mainly used for cloth fixed, so as not to cut out aliasing. The brand of the brand 5: model: for nesting, marking. The brand of the brand 6 、 sewing machine: sewing machine mainly for universal sewing machine, there are two kinds of medium speed and high speed. Household sewing machines are also available. In addition, there are steam irons, ironing table, ruler, angle plate, plate, hot pressing block, needle etc.. The brand of the brand Two, the general production process of the brand of the brand tie The basic process is cutting, sewing, ironing, inspection, packaging, storage and transportation and other processes. The The AP (1) cutting includes nesting, sorting, laying and cutting. The brand of the brand 1, the discharge should consider the following points: in the discharge of the brand of the brand (1) the front and back of the fabric. It is important to identify the positive and negative sides of the fabric. It is very easy to recognize the front and back of printed fabrics, usually the flower faces are clear and the back is fuzzy. Yarn dyed fabric has a beautiful face and a long line on the reverse side. The dyeing fabric and grey fabric is more difficult to identify, in general, the right side of the fabric is smooth, smooth and delicate. F