AutoDesk Inventor Mr. Brunelle（AutoDesk发明家布鲁先生）.pdfVIP

AutoDesk Inventor Beginning Tutorial – the “Lego” In this tutorial, you will construct a simple hollowed-out block with a hole in it (looks like a Lego). You will learn the basics of creating and modifying sketches and features. © E. Brunelle 2014 Getting Started 1. Open Inventor . In the Get Started tab, click on Projects New New Single User Project. Click Next. 2. In the Project Name box, type Lego . In the Project (Workspace) Folder, Be sure your “H” drive is selected. If not, Click on the browser box to select your H:\ drive. 3. Click Finish. The box below should appear. Click OK Done. 4. You will use this process whenever you start a new project. 5. In the Get Started tab, click on New. Select Metric Part Standard(mm).ipt Create. Watch Video 1 6. Fill in your Screen Shot Worksheet. © E. Brunelle 2014 7. Click on the Save icon . Since you created a Project Folder, your Lego should automatically be saved in your Lego project folder. Be sure the file name is legoINL_CAD_1. 8. Go to Tools Document Settings Units. Be sure Millimeters is selected from the Length dropdown menu. Click Apply Close. Watch Video 2 9. Click the “+” sign next to the Origin folder in the Browser Window . Right Click on the XZ Plane New Sketch. © E. Brunelle 2014 10. Manipulate the view cube so that “Front” is facing you: See Below. 11. Click on the Top-Right corner of the View Cube. See Below: 12. This will set the Isometric View correctly for our project. © E. Brunelle 2014 13. In the Draw tab, select the Rectangle