Material Safety Data Sheet Cemented Carbide （材料安全数据表硬质合金）.pdf

Revision Date: APR. 28, 2011 MATERIAL SAFETY DATA SHEET CHEMICAL NAME: CEMENTED CARBIDE 1. CHEMICAL AND MANUFACTURER INFORMATION 1-1. Chemical Name ： Cemented Carbide, Coated Carbide and Cemented Carbide Tools 1-2. Company Information Manufacturer ：Kyocera Corporation Address ：6 Takeda Tobadono-Cho, Fushimi-Ku Kyoto 612-8501 Division ：Corporate Cutting Tool Group Phone No. ：+81-75-604-3651 FAX No. ：+81-75-604-3472 Emergency Contact ： Sendai Quality Assurance Section (Sendai Plant) Phone No. ：+81-996-23-4116 1-3. Recommended use and Restriction on use ： Cutting tools for mainly metal material, wear resistant tool for deformation processing, special cutters and knives, and tools for printed-circuit board. 2. HAZARDS IDENTIFICATION 2-1. Important and hazardous property and influence ・Fire and Explosion Hazard: Cemented carbide is nonflammable in the solid state. However, dusts produced from grinding may trigger a spontaneous ignition or an explosion if allowed to accumulate. There is no information available regarding the flash point, ignition limit, and explosion limit etc. ・Health Hazard: Dust from grinding can cause irritation of skin and eyes. ・Environmental Impact: There is no information available to be harmful regarding cemented carbide. 2-2. GHS classification Not applicable 2-3. GHS label element Not applicable 3. COMPOSITION / INGREDIENTS / IDENTITY INFORMATION Cem