Maintenance ManualMaintenance Manual （维护ManualMaintenance手册）.pdf

Indice B du 16-10-2013 Maintenance Manual Maintenance Manual Agreements: APDOA POA (PART21G) BERINGER AERO - Aéropôle - Champ Eymi - 05130 Tallard page tel: (+33) 492 201 619 fax: (+33) 492 526 966 contact@ MOUNTING MAINTENANCE Date de revision 25 fev. 2014 MANUAL 5 and 6 light BERINGER AERO, Aéropôle, F-05130 Tallard WHEELS and BRAKES Page 1/7 Tel : +33 (0) 4 92 20 16 19 contact@ Installation of the main wheels with brake discs and calipers on the gear leg:  Install the caliper mounted on the main wheel axle on the gear leg and put in the 6 screws (screw head must be on wheel side)  The locking nuts must be on the gear leg side  Put in the brake disc between the two brake pads : YOU MUST NOT DISASSEMBLE THE CALIPER TO DO THIS OPERATION NYLSTOP STAINLESS STEEL NUT (put washers in case of composite gear leg) Tightening torque for the axle/gear leg linkage: Screw 6mm = 10N.m (88 in.lb)  screw ¼ pouce = 9N.m (80 in.lb)  screw 8mm = 20N.m (177 in.lb) Report to the instruction of the plane specific manual. For certain mounting, a bearing spacer is delivered (to fit between the axle and the wheel)  if one spacer is delivered, fit it on the axle  put with the hand the wheel with the tire on the wheel.