墙面瓷砖粘贴（Wall tile paste）.docVIP

墙面瓷砖粘贴（Wall tile paste） Operation instruction ---- wall tile sticker I. construction preparation 1. material requirements 1) cement: No. 425 slag cement or ordinary Portland cement. The factory certificate or re examination shall be issued and shall be used in accordance with the test results if the factory has been in production for more than three months. 2) white cement: No. 425 white cement. 3) sand: coarse sand or medium sand, use before screening. 4) brick face: the surface of tile should be bright and clean, square and smooth; the quality is firm, and its varieties, specifications, sizes, colors and patterns should be uniform, and must comply with the design requirements. No defects such as missing beam, falling angle, dark mark and crack. The general energy index shall meet the requirements of the current national standards, and the water absorption rate of glazed tiles shall not exceed 10%. 5) 107 glue and mineral pigment, etc.. 2. main machines and tools 1) 5mm aperture sieve, sieve screens, buckets, wood trowel, iron trowel, bar, ruler, Fang Chi, iron level, ash ash tank, spoon, brush, wire brush, broom, hammer, small white cloth or cotton, silk, steel knife, shovel, small grey stone, pointing Yunji downpipe, line sinkers, ruler box etc.. 3. operating conditions 1) the wall grassroots clean up, window sills, windows and other blocks in advance blocking. 2) according to the size of tile size, color brick selection, and classified storage reserve. 3) large area before construction should first put the sample and make the model to determine the wall, construction technology and operation points, and do the work to the construction personnel. After the completion of the sample wall, the quality inspection departments must be identified, after passing the design, and Party A and construction units jointly identified, can organize teams and groups, in accordance with the requirements of the model wall construction. Two, operation process 1. process Primary trea